Compatible Printer Ribbon for FUJITSU DPK3600E DPK3800E
Compatible Printer Ribbon Cartridge DPK3600E DPK3800E
Most poor quality consumables are not guaranteed in terms of environmental safety, which not only affects print quality, but also directly affects the health of the user. COBOL DPK3600E DPK3800E, environmentally friendly materials are used for components to protect the office environment from pollution.
How to install printer ribbon?
Although printer ribbon installation is not a difficult technique, it is important to remember to follow the following steps:
First turn the printer off and remove the front cover of the printer;
Then pull the platen roller outwards and lift it upwards to pull the platen roller up;
Squeeze the lower end of the print head with your hand and gently pull outwards to remove the ribbon tab;
The ribbon cartridge can then be removed by grasping the ribbon with your hand and pulling it outwards at the raised position;
The tabs around the ribbon cartridge need to be pushed outwards gently to open the top cover and remove the metal tabs;
The ribbon can be replaced by removing the file and placing the ribbon in the same way as before, provided it is the same model.
Once the ribbon has been replaced, it is time to install the ribbon cartridge. The ribbon cartridge is installed by inserting the front ribbon slot into the corresponding slots on both sides of the print head.
Replacement method for supplementary ribbons: After opening the cover of the ribbon holder, use tweezers to carefully clip out the steel piece inside, remove the old ribbon and replace it with the new ribbon, the ribbon cannot be twisted, twisting the ribbon will easily break through and lead to broken needles.
